View TFS360A_1324567.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

version 1.6 12.04.2001 _____________________________________________________________________________________________________
TFS360A.doc
VI TELEFILTER Filter Specification TFS 360A 1/5 _____________________________________________________________________________________________________
Measurement condition Ambient temperature: 23 C Input power level: 0 dBm Terminating impedances for input: 360 // - 1,05 pF for output: 360 // - 1,05 pF Coupling coil: 91 nH
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 360 A is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fo is the arithmetic mean value of the upper and lower frequencies at the 1.5 dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 360 MHz without tolerance. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo.
Data
_____________________________________________________________________________________________________ Insertion loss ae = amin max. 5,0 dB (Reference level) _____________________________________________________________________________________________________ Nominal frequency 360,00 MHz fN _____________________________________________________________________________________________________ Pass band ripple fN 67,7kHz BW max. 1,5 dB _____________________________________________________________________________________________________ Relative attenuation arel
typ. value
tolerance/limit
fN 0,4 MHz...fN 0,6 MHz min. 29 dB fN 0,6 MHz...fN 0,8 MHz min. 42 dB fN 0,8 MHz...fN 1,6 MHz min. 50 dB fN 1,6 MHz...fN 3,0 MHz min. 45 dB fN 3,0 MHz...fN 115 MHz min. 52 dB _____________________________________________________________________________________________________ Group delay ripple GD fN 67,76 kHz max. 2,0 s _____________________________________________________________________________________________________ Input power level max. 10 dBm _____________________________________________________________________________________________________ Operating temperature range Storage temperature - 20 C ... + 75 C -35 C ...+ 85 C ca. - 0.036
__________________________________________________________________________________________
Temperature coefficient of frequency
__________________________________________________________________________________________
Frequency inversion temperature + 20 C _____________________________________________________________________________________________________
TC
ppm/K
Generated: Checked / approved:
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
version 1.6 12.04.2001 _____________________________________________________________________________________________________
TFS360A.doc
VI TELEFILTER Filter Specification TFS 360A 2/5 _____________________________________________________________________________________________________
Construction, pin configuration and 50 - matching network (All dimensions in mm)
7
5
360A M11
1 3
Pin 1 Pin 2 Pin 3 Pin 4
50 Ohm Test circuit 1
LB-IN L1
Sym. Output Sym. Output External Coil Package Ground
Pin 5 Pin 6 Pin 7 Pin 8
Sym. Input Sym. Input Ground Package ground
6
1
L3
LB-OUT
C1
SAW
5 3 4, 7, 8 L5 2
C2
L2
L4
50 Ohm Test circuit 2
C1 LB-IN 6 1 C3 LB-OUT
L1
SAW
5 2 3 L3
L2
C2
C4
4, 7, 8
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS360A.doc
version 1.6 12.04.2001 _____________________________________________________________________________________________________
VI TELEFILTER Filter Specification TFS 360A 3/5 _____________________________________________________________________________________________________
Stability Characteristics
After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Damp heat: (cycle) 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 25 C to 55C / 95% r.H. / 10 cycles DIN IEC 68 - 2 - 30 Db max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer 3000 min 300 mm min 500 mm min 300 mm
Tape (all dimensions in mm)
EMBOSSED CARRIER TAPE
W Po Do E F
: : : : :
12 4 1,5
0,3 0,1 + 0,1
E Do Po P
2
1,75 0,1
A
o
5,5 0,1
F
G (min) : P2 P1 : :
0,75 2 4 1,5 5,3 5,3 0,1 0,1 0,05 0,1
D 13,4
0,1
1
B
o
W
G
D1(min) : Ao Bo : :
P1
COVER TAPE
W2
Reel (all dimensions in mm): A W1 W2 (max) : N (min) C : : : : 330 12,4 +2 18,4 50
C A N
13
0,25
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS360A.doc
version 1.6 12.04.2001 _____________________________________________________________________________________________________
VI TELEFILTER Filter Specification TFS 360A 4/5 _____________________________________________________________________________________________________
Trailer 500 mm Min.
Leader 500 mm Min.
PIN 1
User direction of feed
Air reflow temperature conditions
1st and 2nd air reflow profile
Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C
Chip-mount air reflow profile
260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240
Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 temperature / C 23 time / sec. 140 temperature / C 160
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS360A.doc
version 1.6 12.04.2001 _____________________________________________________________________________________________________
VI TELEFILTER Filter Specification TFS 360A 5/5 _____________________________________________________________________________________________________
10 20 30 40 50 60 70 80 90 100 110 120 130 34 46 60 80 103 121 134 143 150 154 156 158 159 150 160 170 180 190 195 200 205 210 215 220 230 240 161 164 170 180 205 230 255 230 205 180 165 140 120
History
Version 1.5 Reason of Changes Change date code from month to week Change errors in tape an reel information Remove `Construction and Pin Connection' from page 1 Guarantee better values for stability characteristic Tape drawing with part position added. Name Dr. Wall Date 17.03.2000
1.6
Andre du Hamel 12.04.2001
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

▲Up To Search▲

Price & Availability of TFS360A

	To Download TFS360A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .